See our FB Group for Current TAT- Sezzle Now Accepted

Collection: Sublimation Transfers

Sublimation is a dye process. You need light colored or white 100% polyester or a polyester/cotton mix. I recommend 48% polyester or more. The higher the polyester count the more vibrant your colors will be. Sublimation needs to be pressed at 400° for 60 seconds with medium pressure.

A Cricut Easy press can work but a commercial heat press is recommended. If you do use a cricut easy press I recommend taping your sublimation image down with heat tape.

I’ll only be offering 8.5x11, 11x17 & 13x19 sublimation prints. Sizing also depends on the design. I won’t make my designs any longer than 14.5 inches in height. This way a 15x15 heat press is plenty big enough. TAT 3-5 Business Days. 

To apply:Roll a lint roller over your item to remove any loose fibers or lint. These fibers can turn blue during the process and are permanent. Pre press your garment to remove any moisture. Press transfer accordingly (400° for 60 seconds MEDIUM PRESSURE.) Hot Peel

73 products